Holiday in production in the week of 22.7. – 26.7.
Všechny objednávky začneme zpracovávat v průběhu následujícího týdne od 29.7. 2024. Děkujeme za pochopení.

Playmat game mat with custom print - 60×35

Play mat 60 x 35.5 cm (24″ x 14″) with custom print.

399 

Including VAT 21% | Plus Transport | Production to 3 working days

Upload your design here:

Available on back-order

 Kč

60 x 35.5 cm

Or 24" x 14" - these are the dimensions of a common mat for playing TCG games.

Quality

The pads are made of high-quality rubber material covered with polyester fabric.

Waterproof

The printing on our mats is permanent and waterproof.
So you don't have to worry about accidental spills...

Thickness 1.5 - 3 mm

You can choose between 1.5 mm basic to 3 mm thick premium versions with hemming.

Description

Take your card game experience to the next level with our custom card and board game mat.
On our customized card game mat you can upload your own image or design and customize the mat with a picture of your favorite character, team or even your own design.

 

Features of our playmat - playmat

Playmat is the English term for standard game mat.

This 1.5mm to 3mm thick gaming mat is made of high-quality rubber material with a polyester fabric surface, providing a stable and durable surface for your gaming.
The bottom rubber side is roughened with a pattern for even better grip and resistance to sliding on the table top.

The game pad measures approximately 60 x 35 cm, providing plenty of room for cards and players to have a good view of the battlefield.

The image is printed using high-quality printing methods that ensure the colors remain vibrant and the image clear even after prolonged use.
Order now and make your card game a unique experience!

You can choose from several design variants

  • 1.5mm thick gaming mat without stitching
  • game mat with 2mm thick black stitching
  • game mat with a seam printed with your pattern up to the edge with a thickness of 2 mm
  • game mat with black stitching, 3mm thick
  • game mat with a seam printed with your pattern up to the edge with a thickness of 3 mm
    – we recommend this variant as the best Premium design

Both the print and the material are waterproof and stains can be washed by hand with a sponge or cloth. In extreme cases, the playmat can also be cleaned in the washing machine at 30°C, gentle mode without wringing.

 

How to prepare a print file

The quality of the final product also depends on the quality of the printing materials.
If you are not sure about the quality of the image, you can ask at info@playmat.cz.

Image parameters

Ideal image size: min. 2 MB – max. 10 MB upload limit
DPI (dots per inch): min. 150 – ideally: 300
The mode of your image should be saved as CMYK.
Save your file type (image) as JPG or PNG.
Aspect Ratio: 60 x 35.5 cm / 24 x 14 inches
Size in pixels: min. 3600 x 2100 px
Watch out for the edges!
Allow 1cm of drop (cut area) on all 4 sides.
So don't put texts and important elements near the edges that you don't want to be cut off!

Uploading a preview image

Button “Select Image”
File types:
 JPG/JPEG/JPE or PNG
File size: max. 10 MB is the limit for uploading an image

Sending a picture by email

Button "I will send the picture by email
If you have documents larger than 10MB or
in another format (eg: PDF / PSD / Figma / …)
For example, you can use the service https://www.uschovna.cz/ to share large files.
They then sent everything to email info@playmat.cz.

Additional information

Weight 0,3 kg
Dimensions 40 x 5 x 5 cm
en_GBEnglish

How to prepare a print file:

The quality of the final product depends significantly on the quality of the printing materials!

File types: JPG/JPEG/JPE or PNG
Ideal image size: min. 500 KB – max. 10 MB upload limit
DPI (dots per inch) : min. 150 – ideally: 300
The mode of your image should be saved as RGB or CMYK.
Aspect Ratio: 60 x 35.5 cm / 24 x 14 inches / 12 x 7 / 1800 x 1050 px and more

Larger size or other format: If you have documents larger than 10MB or in a different format than an image (eg: PDF / PSD / Figma / ...), please select the option "I will send the image by email" and send it to info@playmat.cz

Allow 1cm of drop (cut area) on all 4 sides.
So don't put texts and important elements near the edges that you don't want to be partially cut off!